Last updated: November 7, 2026
A flowing series of mountain bends is one thing, but a proper hairpin is a different problem altogether, and the mountain roads of western China throw up plenty of them - those tight, near-180-degree switchbacks where the road doubles back on itself, often carved into a steep slope with a wall on one side and a drop on the other. When I first met them I found them genuinely awkward, because the speed and the lean that work on an ordinary bend are all wrong for something this tight. A hairpin is less about leaning and more about slow, precise control, and once I changed the way I thought about them they stopped being intimidating. This is how I take them now, uphill and downhill.
Get the speed and the gear right first
Everything in a hairpin happens slowly, and that is the key to get into your head. I do all my slowing on the approach while the bike is upright, getting down to walking pace or little more before I start to turn, because carrying road speed into something this tight leaves no room to correct it. I select a low gear on the way in, first or second depending on the bike, so the engine is pulling rather than labouring and I have drive ready the moment I need it. Trying to change gear in the middle of a tight, slow turn is a distraction I simply do not need, so I sort that out before I tip the bike in.
Uphill hairpins: keep the drive on
Climbing into a hairpin, the slope is working against you and the risk is losing momentum and having to wrestle a heavy, slow bike around the turn, or even stalling. I keep a steady, gentle throttle through the bend so the engine keeps pulling me up and around, slipping the clutch a little if I need finer control at very low speed. I look through the corner to where the road opens out again, not down at the front wheel, and I let the bike lean gently while I keep the drive smooth. On a really tight one I may shift my weight slightly to the inside and use a touch of steering pressure, but the priority is simple: don't stop, don't stall, keep it moving up and round.
Downhill hairpins: control the speed
The downhill version is the one most riders find harder, because gravity is now trying to run you wide and build speed just when you need none. I rely on engine braking from a low gear to hold the pace rather than dragging the brakes all the way, and I use gentle, controlled pressure on the brake, mostly the rear for stability at this slow speed, rather than grabbing the front and locking it. I keep the bike upright for as long as I can before turning, then bring it around smoothly, watching the exit and the outside edge carefully. A calm, steady pace is everything here; if I enter too fast I have nowhere to go on a narrow road, so I always err on the slow side.
Steering, space and the road surface
Because a hairpin is so slow, the bike does not need much lean, and trying to lean it over like a normal bend can make the footrest or engine case touch down. Instead I use the handlebars to steer, keeping the bike relatively upright and turning it precisely, using the width of the road that is available while staying firmly on my own side, since a blind switchback can easily hide an oncoming lorry. I watch the surface too, because these tight corners collect loose gravel, damp leaves and wet patches on the inside, and a slippery inside line at walking pace can still drop the bike. I give myself a clean, grippy line and leave the dodgy edge alone. Because everything happens at such low speed, a hairpin rarely produces a serious accident, but the common mishaps are easy to avoid: a foot put down onto loose gravel, a stall halfway round that leaves you balancing on a slope, or a rear wheel that spins and steps out on a damp inside line. Anticipating those three and keeping the bike steady is most of the battle. I also remind myself that a heavier, taller loaded tourer turns more slowly than a light naked bike, so I give it the extra room and time it needs rather than treating every model the same.
Practice and patience
Hairpins reward a few quiet repetitions more than any theory, and when I am somewhere safe and empty I will ride the same one a few times to settle the feel of the gear, the clutch and the steering. The aim is to make the sequence automatic - slow and select gear on the approach, look through the turn, steer smoothly, control the speed downhill or keep the drive uphill, and exit clean. There is no heroism in it at all, just slow, tidy control, and once that feels routine the steepest switchback becomes just another part of an enjoyable mountain ride.
The paperwork side
As with any foreign motorcycle, entry is handled through a licensed travel agency; individuals cannot clear customs on their own. The temporary plate is valid for 3 months, and the insurance is arranged before entry at the actual cost. For the customs guarantee, with our surety in place the rider only pays 10,000 RMB into the corporate account, arriving 3 days before entry and refunded in full within 3-5 working days after the bike leaves. The vehicle inspection fee is around 200 RMB for every bike. Right-hand-drive machines are accepted at every port on the same terms as left-hand-drive with no surcharge.
If you are planning a route heavy with switchbacks and want a view on how your particular bike handles them, or what to practise first, send over the details and I will give you a straight answer.
Ready to plan your ride into China?
Customs declaration, temporary plate, temporary licence and guarantee - handled for you end to end. Ride across the border on arrival day and keep your energy for the road.
WeChat / WhatsApp: +86 13759155671 · Email: [email protected]
Contact Us Now